[G]
: The screen will be switched to Input screen 3.
•
IP addresses will be cleared if you move to another
input screen without pressing
[Start]
.
3
Enter the IP address.
•
If the IP address contains 1 or 2 digit numbers, enter
these numbers as they are. Do not enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
Note
•
You can refer to the contact list when entering
the IP address, by following the procedure
below:
1.
Press
[B]
.
•
The contact list screen is displayed.
2.
Use
[
][
]
to select the contact you want
to refer to.
•
You can use
[
][
]
to select the
displayed tab. (Page 31)
•
You can use the numeric buttons of the
remote control to select the displayed
tab. (Page 31)
3.
Press
[Enter]
.
•
The display returns to the input screen.
•
You cannot enter the IP address using the call
history.
4
Press
[Start]
to start the call.
•
You can also start the call by pressing
[Enter]
.
5
When you want to end the call, press
[End]
.
•
The Home screen is displayed.
34
User Manual
Starting a Video Conference
Summary of Contents for KX-VC500
Page 101: ...User Manual 101 Notes ...
