Panasonic KX-VC500 User Manual Download Page 15

Page: 15 / 102

Main Unit (Back)

RS-232C terminal

This terminal is not available for use.

MIC jack (Page 20)

Used to connect the Boundary Microphone (optional). (Page 17)

Audio In L/R jack (Page 20)

Used to connect general-purpose microphones (not for the Boundary Microphone).

LAN jack (Page 20)

Connect a LAN cable.

Camera Control terminal

This terminal is not available for use.

Main Camera terminal (Page 20)

Connect the main video camera with an HDMI cable.

Sub Camera terminal

Used to connect a second, sub video camera with an HDMI cable for sharing video contents apart from
the main video camera. (Page 52)

RGB terminal

Used to connect a computer for sending screens to participants. (Page 49)

HDMI terminal (Page 20)

Used to connect to the display with an HDMI cable.

Component terminal (Page 23)

Used to connect to the display with a component video cable.

Audio Out L/R jack (Page 23)

Used to connect an amplifier or active speaker.

GND terminal

Used to connect an earthing wire when the power cord’s earth terminal connection is not available.

AC IN (Page 21)

Connect the power cord.

User Manual

Preparation

Summary of Contents for KX-VC500







































































































Search results

Summary of Contents for KX-VC500

Reviews:

Brands by name

Popular brands

Panasonic KX-VC500, User Manual

Search results

Summary of Contents for KX-VC500

Reviews:

Brands by name

Popular brands