manualshive.com logo in svg

Panasonic KX-TVM200, Installation Manual

Share
Download
Panasonic KX-TVM200 Installation Manual Download Page 95

4.2 KX-TDA Series PBX Programming for DPT Integration

Installation Manual

95

[Example Settings (1)]

Program the PBX so that all trunk calls are directed to the VPS (DIL feature).

1)

Go

 to the 

"CO & Incoming Call-DIL Table & Port Setting"

 screen.

2)

Assign "DIL Destination Day/Night/Lunch/Break"

 for each trunk to a floating extension 

number (VPS Port).

3)

Click "Apply"

 to save the changed data.

Calls received on the assigned trunks will be directed to the VPS. The VPS will answer those 
calls using the service (AA, VM, Custom Service, etc.) assigned to each VPS port through VPS 
programming.

Note

•

The above screen output appears only when all the trunk cards mounted on your PBX 
are LCOT8 cards.

Summary of Contents for KX-TVM200



























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands