Answering system
Problem
Cause/solution
The unit does not record new
messages.
R
The answering system is turned off. Turn it on (page 56).
R
The answering system does not answer or record calls
from cellular lines.
R
The message memory is full. Erase unnecessary
messages (page 57).
R
The recording time is set to
“
Greeting only
”
. Change
the setting (page 62).
R
If you subscribe to a voice mail service, messages are
recorded by your service provider/telephone company,
not your telephone. Change the unit’s number of rings
setting or contact your service provider/telephone
company (page 62).
R
The answering system will not answer incoming calls
while:
– the base unit or 2 or more handsets are on a cellular
call or an intercom call.
– a headset is in use.
Caller information is recorded in the caller list.
I cannot operate the answering
system remotely.
R
The remote access code is not set. Set the remote
access code (page 60).
R
You are entering the wrong remote access code. If you
have forgotten your remote access code, enter the
remote access code setting to check your current code
(page 60).
R
The answering system is turned off. Turn it on (page 61).
R
You cannot operate the answering system when calling a
cellular phone paired to the base unit.
The unit does not emit the
specified number of rings.
R
If the first ring is turned off, the number of rings decreases
by 1 from the specified number of rings.
Bluetooth PIN
Problem
Cause/solution
I cannot remember the PIN.
R
Change the PIN using the following method.
1
M
MENU
N#619
2
*7000
3
Enter the new 4-digit PIN.
a
M
OK
N
4
Enter the new 4-digit PIN again.
a
M
SAVE
N
a
M
OFF
N
For assistance, please visit http://www.panasonic.com/help
75
Useful Information
TG78xx(en)_1210_ver101.pdf 75
2012/12/10 21:19:32
