Panasonic KX-TGA680, Operating Instructions Manual

Page: 46 / 109

Handset
n When a cellular phone is paired:
1
MCN CID
2
MbN : Select the entry to be blocked. a
M SELECT N
R To edit the number, press *
repeatedly until the phone number
is shown in the 10-digit format.
3
M SAVE N
4
MbN : “
Call block
” a M SELECT N
5
MbN : “
Yes
” a M SELECT N
6
Edit the phone number if necessary
(24 digits max.).
7
M SAVE N a M OFF N
n When a cellular phone is not paired:
1
MCN CID
2
MbN : Select the entry to be blocked.
R To edit the number: M MENU N a
MbN : “
Edit
” a M SELECT N
Press M EDIT N repeatedly until the
phone number is shown in the
10-digit format. And then, press
M SAVE N . Go to step 5.
3
M MENU N
4
MbN : “
Save CID
” a M SELECT N
5
MbN : “ Call block ” a M SELECT N
6
MbN : “
Yes
” a M SELECT N
7
Edit the phone number if necessary
(24 digits max.).
8
M SAVE N a M OFF N
Base unit
1
M CID N
2
MbN : Select the entry to be blocked.
R To edit the number, press M EDIT N
repeatedly until the phone number is
shown in the 10-digit format.
3
M SAVE N
4
MbN : “
Call block
” a M SELECT N
5
MbN : “
Yes
” a M SELECT N
6
Edit the phone number if necessary (24
digits max.).
7
M SAVE N a M EXIT N
n By entering phone numbers:
Handset
1
M MENU N#217
2
M MENU N a MbN : “ Add ” a M SELECT N
3
Enter the phone number (24 digits max.).
R To erase a digit, press M CLEAR N .
4
M SAVE N a M OFF N
Base unit
1
M MENU N#217 a M ADD N
2
Enter the phone number (24 digits max.).
R To erase a digit, press M CLEAR N .
3
M SAVE N a M EXIT N
Blocking incoming calls without
phone number
You can reject a call when no phone number
is provided, such as a call just showing
“
Out
of area
” .
Handset / Base unit
1
M MENU N#240
2
MbN : Select the desired setting. a
M SAVE N
3
Proceed with the operation for your unit.
Handset: M OFF N
Base unit: M EXIT N
Note:
R When the unit receives a cellular call
without a phone number, the call may not
be rejected.
Setting the first ring for the call block
list
Handset / Base unit
If you do not want the first ring from a number
on the call block list to sound, turn the first ring
setting to
“
Off
” . The default setting is “
On
” .
1
M MENU N#173
2
MbN : Select the desired setting. a
M SAVE N
46 For assistance, please visit http://www.panasonic.com/help
Programming
TG78xx(en)_1210_ver101.pdf 46 2012/12/10 21:19:29