Panasonic KX-TGA680 Operating Instructions Manual Download | Manualshive

Page: 68 / 109

background image

Error messages

Display message

Cause/solution

Base no power

or

No link. Re-connect base
AC adaptor.

or

No link.

R

The handset has lost communication with the base
unit. Move closer to the base unit and try again.

R

Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.

R

The handset’s registration may have been canceled.
Re-register the handset (page 47).

R

When

“

No link.

”

is displayed during a power

failure, place a handset on the base unit to supply
power to the base unit.

Busy

R

No cellular phone is paired to the base unit. Pair a
cellular phone (page 17).

R

The called unit is in use.

R

Other units are in use and the system is busy. Try
again later.

R

The handset you are using is too far from the base
unit. Move closer and try again.

Call phone company for
your access #

R

You have not stored the voice mail access number.
Store the number (page 63).

Check tel line

R

The supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 10).

R

If you do not connect the telephone line cord and use
only cellular lines, set the cellular line only mode
(page 19).

Error!!

R

Recording was too short. Try again.

R

Someone is using a cellular line or headset. Try
again later.

R

The phonebook copy is incomplete (page 52). The
cellular phone is disconnected from the base unit.
Make sure that other Bluetooth devices are not
connected to the cellular phone, and try again.

Failed

R

Although the unit tried to connect to the cellular
phone or headset, the connection has been failed.
– Someone is using a cellular line or headset. Try

again later.

– Make sure that the cellular phone or headset is

not connected to other Bluetooth devices.

Invalid

R

There is no handset registered to the base unit
matching the handset number you entered.

R

The handset is not registered to the base unit.
Register the handset (page 47).

Requires subscription to
Caller ID.

R

You must subscribe to a Caller ID service. Once you
receive caller information after subscribing to a Caller
ID service, this message will not be displayed.

68

For assistance, please visit http://www.panasonic.com/help

Useful Information

TG78xx(en)_1210_ver101.pdf 68

2012/12/10 21:19:31

«
...
66
67
68
69
70
...
»

Summary of Contents for KX-TGA680














































































































Reviews:

No comments

Related manuals for KX-TGA680

Brand: Happy Pages: 30

Brand: Jack Pages: 7

Brand: Jack Pages: 22

Brand: Baby Lock Pages: 2

Brand: Janome Pages: 25

Brand: Consew Pages: 42

Brand: Mannsberger Pages: 22

Brand: DURKOPP ADLER Pages: 49

Little Misty LM-1

Brand: Talent Pages: 6

Brand: Uchida Yoko Pages: 25

INNOVATECH P550Y

Brand: Bartell Pages: 20

Sweepmaster B1200 RH

Brand: HAKO Pages: 64

Brand: handi quilter Pages: 11

AquaRide 56314009

Brand: Nilfisk-Advance Pages: 32

Brand: Bernina Pages: 48

Brand: JUKI Pages: 264

Brand: AEG Pages: 28

LAVAMAT 69470FL

Brand: AEG Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands