Copying phonebook from a
cellular phone (phonebook
transfer)
You can copy phonebook entries from the
paired cellular phones or other cellular phones
(not paired) to the unit’s shared phonebook. A
cellular phone must be compatible with
Bluetooth wireless technology.
Important:
R
If a copied entry has 2 or more phone
numbers, each phone number (6 max.) is
stored as a separate entry with the same
name.
R
If a phonebook entry includes additional
data such as a picture, that entry may fail to
copy to the base unit.
R
If your cellular phone includes international
call entries, set the conversion codes
before copying (page 52).
1
Handset:
M
MENU
N#618
2
Handset:
To copy from paired cellular phones:
MbN
: Select the desired cellular phone.
a
M
SELECT
N
R
Copied items are stored to the group
(
“
Cell 1
”
or
“
Cell 2
”
) which the
cellular phone is paired to.
To copy from other cellular phones
(not paired):
MbN
:
“
Other cell
”
a
M
SELECT
N
a
MbN
: Select the group you want to copy to.
a
M
SELECT
N
3
When “
Use the cell to
transfer phone book
” is displayed:
Go to step 4.
When “
Select mode
” menu is
displayed:
MbN
: Select
“
Auto
”
or
“
Manual
”
.
a
M
SELECT
N
“
Auto
”
: Download all entries from the
cellular phone automatically. Go to step 5.
“
Manual
”
: Copy entries you selected.
R
“
Select mode
”
menu is displayed
only when the cellular phone supports
PBAP (Phone Book Access Profile) for
Bluetooth connection.
4
Cellular phone:
Follow the instructions of your cellular
phone to copy phonebook entries.
R
For other cellular phones (not paired),
you need to search for and select the
base unit. The base unit PIN (default:
“
0000
”
) may be required.
R
The entries being copied are displayed
on the handset.
5
Handset:
Wait until
“
Completed
”
is displayed.
R
You can continue copying other entries
if necessary.
6
Handset:
M
OFF
N
Note:
R
Some copied entries may have characters
which do not exist in the character table
(page 32). These characters can be
displayed but cannot be entered when
editing an entry.
R
The unit does not support some characters.
If a copied entry includes those characters,
they are replaced with other available
characters or “
H
”.
R
If you receive a call while copying
phonebook entries, the copying procedure
stops. Try again after finishing the call.
Setting conversion codes
You must first set the following 3 dialing codes
in the base unit which you want to copy to
before transferring the phonebook from your
cellular phone (each 4 digits max.).
–
“
International
”
: An international prefix
used when you make an international call.
–
“
Country code
”
: Your country code for
international calls.
–
“
National access
”
: A trunk prefix; the
initial digit(s) to be dialed in a domestic call,
prior to the area code.
Base unit
1
M
MENU
N
2
To store
“
International
”
:
#117
To store
“
Country code
”
:
#118
52
For assistance, please visit http://www.panasonic.com/help
Using Bluetooth Devices
TG78xx(en)_1210_ver101.pdf 52
2012/12/10 21:19:29
