Editing a caller’s phone number
before calling back
You can edit a phone number in the caller list
by removing its area code and/or the long
distance code “1”.
Handset
n
When a cellular phone is paired:
1
MCN
CID
2
MbN
: Select the desired entry.
3
Press
M
SELECT
N
, then press
*
repeatedly until the phone number is
shown in the desired format.
A
B
C
Local phone number
Example:
321-5555
Area code – Local phone number
Example:
555-321-5555
1 – Area code – Local phone number
Example:
1-555-321-5555
4
Using a cellular line:
To make a cellular call, continue from
step 4, “Viewing the caller list and
calling back”, page 49.
Using the landline:
M
N
n
When a cellular phone is not paired:
1
MCN
CID
2
MbN
: Select the desired entry.
3
M
MENU
N
a
MbN
:
“
Edit
”
a
M
SELECT
N
4
Press
M
EDIT
N
repeatedly until the
phone number is shown in the desired
format.
A
B
C
Local phone number
Example:
321-5555
Area code – Local phone number
Example:
555-321-5555
1 – Area code – Local phone number
Example:
1-555-321-5555
5
M
N
Base unit
1
M
CID
N
2
MbN
: Select the desired entry.
3
Press
M
EDIT
N
repeatedly until the phone
number is shown in the desired format.
A
B
C
Local phone number
Example:
321-5555
Area code – Local phone number
Example:
555-321-5555
1 – Area code – Local phone number
Example:
1-555-321-5555
4
Using a cellular line:
To make a cellular call, continue from
step 3, “Viewing the caller list and calling
back”, page 49.
Using the landline:
MZN
Caller ID number auto edit feature
Handset / Base unit
Once you call back an edited number, the unit
which was used to call back remembers the
area code and format of the edited number.
The next time someone calls from the same
area code, caller information is customized by
the unit as follows:
– When the call is being received, the Caller
ID number is displayed in the same format
as the edited number.
– After the call has ended, the caller’s phone
number is displayed in the same format as
the edited number, when reviewed from the
caller list.
For example, you can use this feature to set
the unit to ignore the area code of callers in
your area, so that you can call these local
numbers using caller information without
dialing the area code.
To activate this feature, you must edit an entry
in the caller list, then call that number. After
that, phone numbers from that caller’s area
code are edited automatically.
This feature can be set for each unit (page 40,
43). The default setting is
“
On
”
.
50
For assistance, please visit http://www.panasonic.com/help
Caller ID Service
TG78xx(en)_1210_ver101.pdf 50
2012/12/10 21:19:29
