Preparation
15
L
If you want to use the handset immediately,
charge the batteries for at least 15 minutes.
L
Clean the charge contacts of the handset and
charger with a soft and dry cloth once a month.
Clean more often if the unit is exposed to
grease, dust, or high humidity.
Battery level
Note:
L
The batteries need to be charged if the handset
beeps while you are engaged in a call or
operating the answering system remotely.
Panasonic Ni-MH battery performance
(supplied batteries)
Note:
L
Actual battery performance depends on a
combination of how often the handset is in use
and how often it is not in use (standby).
L
Even after the handset is fully charged, the
handset can be left on the charger without any ill
effect on the batteries.
L
The battery level may not be displayed correctly
after you replace the batteries. In this case,
place the handset on the charger and let it
charge for at least 7 hours.
Setting up the unit before
use
Display language
You can select either
“
English
”
or
“
Français
”
as the display language. The default setting is
“
English
”
.
1
{
MENU
}
i
{#}{
1
}{
1
}{
0
}
2
{V}
/
{^}
: Select the desired setting.
3
Press the middle soft key to save.
4
Proceed with the operation for your unit.
Base unit:
{
■
}
(EXIT)
Handset:
{
OFF
}
Voice guidance language
You can select either
“
English
”
or
“
Français
”
as the voice guidance language of the answering
system. The default setting is
“
English
”
.
Program this setting using either the base unit or
one of the handsets.
1
{
MENU
}
i
{#}{
1
}{
1
}{
2
}
2
{V}
/
{^}
: Select the desired setting.
3
{
SAVE
}
4
Proceed with the operation for your unit.
Base unit:
{
■
}
(EXIT)
Handset:
{
OFF
}
Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is
“
Tone
”
.
“
Tone
”
: For tone dial service.
“
Pulse
”
: For rotary/pulse dial service.
Program this setting using either the base unit or
one of the handsets.
1
{
MENU
}
i
{#}{
1
}{
2
}{
0
}
2
{V}
/
{^}
: Select the desired setting.
3
{
SAVE
}
4
Proceed with the operation for your unit.
Battery icon
Battery level
1
High
2
Medium
3
Low
L
When flashing: Needs
to be charged.
4
Empty
Operation
Operating time
In continuous use
12 hours max.
Not in use (standby)
6 days max.
:
Base unit /
Y
Handset
:
Base unit /
Y
Handset
:
Base unit /
Y
Handset
TG9391C(e).book Page 15 Wednesday, August 27, 2008 2:36 PM
