Preparation
9
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Connections
Base unit
When connecting the AC adaptor to the
base unit, a short beep will be heard. If it is
not heard, check the connections.
Charger
(KX-TG8102 and KX-TG8122 only)
Connect the AC adaptor to the charger and
route the cable as shown. The charger can
be mounted on the wall, if required.
Note:
L
Never install telephone wiring during a
lightning storm.
L
The AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)
L
The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
L
The unit will not work during a power
failure.
We therefore recommend you
also connect a corded-type telephone
(without AC adaptor) to the same
telephone line using a T-adaptor. Your
Panasonic sales shop can offer you more
information about connection possibilities.
Location
L
For maximum distance and noise-free
operation, place your base unit:
– away from electrical appliances such as
TVs, radios, personal computers or
other phones.
– in a convenient, high and central
location.
Use only the included AC adaptor
and telephone line cord.
Hook
(220
–
240 V, 50 Hz)
To telephone
network
Screws
25 mm
(220–240 V,
50 Hz)
Use only the included AC adaptor.
Hooks
TG8100-8120E(e).book Page 9 Friday, March 3, 2006 10:34 AM
