Preparation
11
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Battery strength
Panasonic Ni-MH battery performance
(included batteries)
Note:
L
It is normal for batteries not to reach full
capacity at the initial charge. Maximum
battery performance is reached after a few
complete cycles of charge/discharge
(use).
L
Actual battery performance depends on a
combination of how often the handset is in
use and how often it is not in use
(standby).
L
Battery operating time may be shortened
over time depending on usage conditions
and ambient temperature.
L
Even after the handset is fully charged,
the handset can be left on the base unit or
charger without any ill effect on the
batteries.
L
The battery strength may not be displayed
correctly after you replace the batteries. In
this case, place the handset on the base
unit or charger and charge for at least 7
hours.
Screen saver mode
The backlight will turn off completely
after 1 minute of inactivity
if the handset is
not on the base unit or charger.
To use the handset when it is in screen
saver mode, first press
{ih}
to turn the
display on again.
Turning the power on/off
Power on
Press
{ih}
for about 1 second.
Power off
Press
{ih}
for about 2 seconds.
Symbols used in these
operating instructions
Battery icon
Battery strength
1
High
2
Medium
3
Low
When flashing: Needs
to be charged.
Operation
Operating time
In continuous use
12 hours max.
In continuous
standby mode
150 hours max.
Symbol
Meaning
"
Press
"
(middle soft key).
i
Proceed to the next operation.
#
Press
#
(middle soft key).
j
X
K
*1
I
*2
N
L
M
Select the mentioned handset
menu icon (page 8).
Example:
N
(handset setup
menu icon)
Select
N
by pressing
{^}
,
{V}
,
{
<
}
, or
{
>
}
.
“ ”
Select the words in quotations
shown on the display (e.g.,
“
Time Settings
”
) by
pressing
{^}
or
{V}
.
*1 KX-TG8100 and KX-TG8102 only
*2 KX-TG8120 and KX-TG8122 only
TG8100-8120E(e).book Page 11 Friday, March 3, 2006 10:34 AM
