Panasonic KX-TG5562C Operating Instructions Manual Download

Page: 73 / 84

Useful Information

---Incomplete---
Tom Jones
555-765-4321

(The name/number is an
example.)

The destination handset is out of area.

The destination handset user may have pressed

{C}

{s}

Invalid

There is no handset registered to the base unit
matching the extension number you entered.

You selected your own extension number.

You cannot rename the preset song.

Invalid.
Please register
to the base unit

The handset you tried to call has not been registered to
the base unit. Register the handset (page 63).

Memory full

There is no space in memory to record new songs.
Erase unnecessary songs.

No items stored

Your phonebook or redial list is empty.

Colour display models (KX-TG5566C and KX-
TGA552C only):
“

User data

” is empty. You can download your original

data for the wallpaper and picture ID from a PC. Refer
to the help section of the GIGARANGE USB Utility
software for details.

No link to base.
Move closer to
base, try again.

The handset has lost communication with the base unit.
Move closer to the base unit, and try again.

Confirm that the base unit’s AC adaptor is plugged in.

Raise the base unit antennas.

The handset’s registration may have been cancelled.
Re-register the handset (page 63).

Not erasable

You cannot erase the preset song.

Phonebook full

There is no space to store new items in the phonebook.
Erase unnecessary items (page 31).

Please lift up and
try again.

A handset button was pressed while the handset was
on the base unit or charger. Lift the handset and press
the button again.

System is busy.
Please try again
later.

The handset has lost communication with the base unit.
Move closer to the base unit and try again.

Other units are in use and the system is busy. Try again
later.

Another user is listening to messages. Try again later.

Display message

Cause & solution

TG5562C_5566C(e).book Page 73 Friday, May 27, 2005 10:14 AM

Summary of Contents for KX-TG5562C





















































































Search results

Summary of Contents for KX-TG5562C

Reviews:

Related manuals for KX-TG5562C

Brands by name

Popular brands

Panasonic KX-TG5562C, Operating Instructions Manual

Search results

Summary of Contents for KX-TG5562C

Reviews:

Related manuals for KX-TG5562C

Brands by name

Popular brands