Panasonic KX TG5240 - 5.8 GHz EXPANDABLE CORDLESS PHONE Operating Instructions Manual Download Page 95

Page: 95 / 104

Useful Info

rmation

Answering

System

Preparatio

Important Safety Instructions

For assistance, please call: 1-800-211-PANA(7262)

lephone System

CAUTION:

To reduce the risk of fire or injury to persons, read and follow these instructions.

1. Use only the battery(ies) specified.
2. Do not dispose of the battery(ies) in a fire. They may explode. Check with local

waste management codes for special disposal instructions.

3. Do not open or mutilate the battery(ies). Released electrolyte is corrosive and

may cause burns or injury to the eyes or skin. The electrolyte may be toxic if
swallowed.

4. Exercise care in handling batteries in order not to short the battery to conductive

materials such as rings, bracelets, and keys. The battery and/or conductor may
overheat and cause burns.

5. Charge the battery(ies) provided with or identified for use with this product only in

accordance with the instructions and limitations specified in this manual.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.

•

The AC adaptor is used as the main disconnect device, ensure that the AC outlet is
located/installed near the unit and is easily accessible.

TG5240.fm Page 95 Wednesday, September 22, 2004 3:45 PM

Summary of Contents for KX TG5240 - 5.8 GHz EXPANDABLE CORDLESS PHONE









































































































Search results

Summary of Contents for KX TG5240 - 5.8 GHz EXPANDABLE CORDLESS PHONE

Reviews:

Related manuals for KX TG5240 - 5.8 GHz EXPANDABLE CORDLESS PHONE

Brands by name

Popular brands

Panasonic KX TG5240 - 5.8 GHz EXPANDABLE CORDLESS PHONE, Operating Instructions Manual

Search results

Summary of Contents for KX TG5240 - 5.8 GHz EXPANDABLE CORDLESS PHONE

Reviews:

Related manuals for KX TG5240 - 5.8 GHz EXPANDABLE CORDLESS PHONE

Brands by name

Popular brands