Panasonic KX TG5240 - 5.8 GHz EXPANDABLE CORDLESS PHONE Operating Instructions Manual Download Page 31

Page: 31 / 104

Useful Info

rmation

Answering

System

Preparatio

For assistance, please call: 1-800-211-PANA(7262)

lephone System

Answering Calls

When a call is received, the unit rings, “

Incoming call

” is displayed, and the

Ringer/Message Alert indicator on the handset and the IN USE indicator on the base
unit flash rapidly.

Temporary ringer off

While the handset is ringing for an outside call, you can turn the ringer off
temporarily by pressing

[OFF]

. The handset will ring again as normal the next time

a call is received.

Press

[

]

[

]

•

You can also answer a call by pressing any
button

except

[

]

[

]

[OFF]

To hang up, press

[OFF]

or place the

handset on the base unit or charger.

Auto Talk

If the Auto Talk feature is turned on (p. 19), you can
answer a call by simply lifting the handset off the
base unit or charger (for KX-TG5243 or accessory
handset users, p. 3).

Press

[SP-PHONE]

Talk into the

MIC

To hang up, press

[SP-PHONE]

• To transfer the call to another extension, see page 50.
• To transfer the call to a mailbox to allow the caller to leave a message,

see page 69.

•

If the ringer volume is turned off, the unit will not ring (p. 20, 21).

Handset

[ ]

[OFF]

Ringer/
Message
Alert
Indicator

Base Unit

MIC

[SP-PHONE]

and Indicator

IN USE
Indicator

TG5240.fm Page 31 Wednesday, September 22, 2004 3:45 PM

Summary of Contents for KX TG5240 - 5.8 GHz EXPANDABLE CORDLESS PHONE









































































































Search results

Summary of Contents for KX TG5240 - 5.8 GHz EXPANDABLE CORDLESS PHONE

Reviews:

Related manuals for KX TG5240 - 5.8 GHz EXPANDABLE CORDLESS PHONE

Brands by name

Popular brands

Panasonic KX TG5240 - 5.8 GHz EXPANDABLE CORDLESS PHONE, Operating Instructions Manual

Search results

Summary of Contents for KX TG5240 - 5.8 GHz EXPANDABLE CORDLESS PHONE

Reviews:

Related manuals for KX TG5240 - 5.8 GHz EXPANDABLE CORDLESS PHONE

Brands by name

Popular brands