12
Installation
Connections
Base unit
•
Base unit: USE ONLY WITH Panasonic AC ADAPTOR PQLV1 (Order No.
PQLV1Z).
•
The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
•
If your unit is connected to a PBX which does not support Caller ID, you cannot
access Caller ID services.
•
This unit will not function during a power failure. We recommend connecting a
standard telephone to the same telephone line or to the same telephone jack
using the Panasonic KX-J66 T-adaptor.
* If the unit is connected to a telephone line with DSL service, you may hear noise
from the receiver or speaker during conversations or the unit may not display
caller’s name and/or phone number properly. We recommend connecting a noise
filter (contact your DSL service provider) to the telephone line between the base
unit and the telephone line jack.
Charger unit (KX-TG5243 only)
Hook
Bottom of the base unit
Fasten the AC adaptor cord.
Single-Line Telephone Jack (RJ11C)
AC Adaptor
for Base Unit
Power Outlet (AC 120 V, 60 Hz)
Raise the antennas.
Telephone Line Cord
*Noise Filter
(For DSL users)
AC Adaptor
Power Outlet (AC 120 V, 60 Hz)
•
Charger unit: USE ONLY WITH
Panasonic AC ADAPTOR KX-TCA1
(Order No. KX-TCA1-G).
•
The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
TG5240.fm Page 12 Wednesday, September 22, 2004 3:45 PM
Summary of Contents for KX TG5240 - 5.8 GHz EXPANDABLE CORDLESS PHONE
Page 101: ...101 ...
Page 102: ...102 ...
