Panasonic KX-TG4500 - Cordless Phone And 4 Handsets, Operating Instructions Manual

Page: 53 / 124

Voice Mail System
For assistance, please visit http://www.panasonic.com/phonehelp
53
Listening to only new messages
1
While in standby mode and the
F
indicator is flashing, press
F
.
L
“ This is the general delivery mailbox. ” is
announced.
L
If there is one new message , “ You have
one new message. ” is announced.
L
If there is more than one new message,
“
You have <number> new messages. ”
is announced.
L
If you have more than 100 new
messages, “
You have more than 100
new messages. ” is announced.
L
If you have no new messages, “ You
have no new messages. ” is announced.
2
New messages are played.
L
The first message is played back, and
the message number is displayed. The
name and number are displayed if you
have subscribed to Caller ID services
(page 47).
L
For each message “ Message recorded
on <date> at <time>. ” is announced,
followed by confirmation tone.
L
After each message playback, the next
message plays.
L
Press
{f}
or
{g}
to repeat the current
message or move on to the next
message, as required. Before the
current message is repeated,
“ Repeat ”
is announced. Before the next message
is played,
“ Next ” is announced.
L
After the last message is played, “ This
is the last message. ” is announced.
3
Press
{
EXIT
}
to return to standby
mode.
Listening to all messages
1
While the base unit is in standby mode
and the
F
indicator is flashing, press
F
.
L
“ This is the general delivery mailbox. ” is
announced.
L
If there is one new message , “ You have
one new message. ” is announced.
L
If there is more than one new message,
“
You have <number> new messages. ”
is announced.
L
If you have more than 100 new
messages, “
You have more than 100
new messages. ” is announced.
L
If you have no new messages, “ You
have no new messages. ” is announced.
2
Scroll to “
Play all messages
” by
pressing
{
<
}
or
{
>
}
, then press
{
ENTER
}
.
L
If you have messages, “ You have
<number> messages. ” is announced.
L
All messages are played.
L
If there are no messages, “ There are no
messages. ” is announced.
L
The first message is played back, and
the message number is displayed. The
name and number are displayed if you
have subscribed to Caller ID services
(
page 47
).
L
For each message, “ Message recorded
on <date> at <time>. ” is announced,
followed by confirmation tone.
L
Press
{f}
or
{g}
to repeat the current
message or move on to the next
message, as required. Before the
current message is repeated,
“ Repeat ”
is announced. Before the next message
is played,
“ Next ” is announced.
L
After the last message is played, “ This
is the last message. ” is announced.
3
Press
{
EXIT
}
to return to standby
mode.