Useful Information
106
For assistance, please visit http://www.panasonic.com/phonehelp
Caller ID
Problem
Cause and solution
The caller’s information is
not displayed.
L
You have not subscribed to a caller ID service. Contact
your telephone service provider to subscribe.
L
If your unit is connected to any additional telephone
equipment such as a caller ID box or wireless telephone
jack, disconnect the unit from the equipment and plug
the unit directly into the wall jack.
L
If your unit is connected to a telephone line with DSL
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your DSL provider for details.
L
The name display service may not be available in some
areas. Contact your telephone service provider for
details.
L
Other telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
L
The caller requested not to send caller information
(page 47).
L
Generally caller information is displayed after the
second ring.
The display goes into
standby mode while
viewing the Caller List.
L
Do not pause for over 60 seconds while searching.
The caller list/incoming
phone numbers are not
edited automatically.
L
The Caller ID number auto edit feature is turned off.
Turn it on and try again (page 49).
L
You need to call back the edited number to activate
Caller ID number auto edit.
The second caller’s
information is not
displayed during an
outside call. (The Call
Waiting Caller ID (CWID)
feature does not
function.)
L
In order to use Caller ID, Call Waiting, or Call Waiting
Caller ID (CWID), you must first contact your telephone
service provider and subscribe to the desired service.
After subscribing, you may need to contact your
telephone service provider again to activate this
specific service, even if you already subscribed to both
Caller ID and Call Waiting with Caller ID services
(CWID).
