62
Listening to Messages
From the Handset
If someone else is in the room and you want to listen to the recorded
messages privately, you can use the handset.
1
Handset:
Press
(FLASH/CALL!WAIT/PLAYBACK)
.
•
The number of new messages is heard on the handset.
2
Base unit:
To listen to new messages, press
(NEW!MESSAGE)
briefly. To listen
to all messages, press and hold
(NEW!MESSAGE)
until playback
starts.
•
The messages will be heard
on the handset.
•
Ü
,
á
and
(STOP/EXIT)
can also be used during
playback (p. 61).
3
When finished, press
(FLASH/CALL!WAIT/PLAYBACK)
or place the handset on the
base unit.
•
You can also listen to messages without using the base unit. See page 70.
For Call Display service users
(p. 32)
During playback, the base unit display will
show the name and/or number of the caller
whose message is being played.
To call back the displayed number:
During playback, lift the handset and press
(TALK)
within 10 seconds,
or press
(DIGITAL!SP-PHONE)
.
•
The unit stops playback and automatically dials the displayed phone number.
•
After listening to new incoming messages, “
√
” will be added to the call entries
in the Call Display Caller List (p. 35).
JACK SMITH
1-222-333-4444
- Message 3 -
