Panasonic KX-TG2583CB Page 16 Operating Instructions Manual Download

Page: 16 / 88

Programmable Functions

Save DIRECT#

Set flash time

Set line mode

Set dial mode

Talk switching

TAD program

C.WTG options

Change language

You can program the following function items

using the handset near

the base unit

. The display shows the programming instructions. See the

corresponding pages for function details.

Make sure the unit is in the standby mode initially.

During programming:

*To select a desired function item, press

repeatedly until the

arrow points to the item. Then press

FWD/EDIT

to go to the next step.

•

You can exit the programming mode any time by pressing

(FUNCTION/EXIT/CH)

•

If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.

•

If the handset has lost communication with the base unit, 3 beeps sound and “

link to base. Place on cradle and try again.

” is displayed.

Press

(FUNCTION/EXIT/CH)

<Function menu>*

To store an item in the directory (p. 44).

To select the ringer volume (p. 18).

Press

FWD/EDIT

To store a phone number in the DIRECT button
(p. 41).

To select the flash time (p. 59).

To select the line mode (p. 15).

To select the dial mode (p. 14).

To set the auto talk feature (p. 17).

To program answering system functions (p. 21).

To select the “C.WTG (Call Waiting) options”
mode (p. 55).

To select the display and voice guidance
language (p. 13).

Save directory

Ringer volume

Program

<Function menu>*

Summary of Contents for KX-TG2583CB

























































































Search results

Summary of Contents for KX-TG2583CB

Reviews:

Related manuals for KX-TG2583CB

Brands by name

Popular brands

Panasonic KX-TG2583CB, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2583CB

Reviews:

Related manuals for KX-TG2583CB

Brands by name

Popular brands