manualshive.com logo in svg

Panasonic KX-TG2583CB, Operating Instructions Manual, Page: 54 / 88

Share
Download
Panasonic KX-TG2583CB Operating Instructions Manual Download Page 54

54

Special Features

For Call Waiting Service Users

Press 

(FLASH/CALL!WAIT/PLAYBACK)

or 

(CALL!WAIT/FLASH)

if you hear

a call-waiting tone while talking.

•

The first call is put on hold and you can answer the second call.

•

To return to the first caller, press 

(FLASH/CALL!WAIT/PLAYBACK)

or

(CALL!WAIT/FLASH)

again.

•

The call waiting service cannot be used when:
—the answering system is recording someone’s message, or
—a parallel connected telephone is in use.

•

If this function does not operate properly, consult your telephone company for
details.

Visual Call Waiting Service

Visual Call Waiting Service allows your unit to
display the second caller’s information. After you
hear a call-waiting tone while talking, the unit
will display the caller’s name with the phone
number and “

----Waiting-----

”.

•

Please contact your telephone company for details and availability in your area.

NANCY BROWN
1-000-222-3333
----Waiting-----

(CALL!WAIT/FLASH)

(REDIAL/PAUSE)

(TONE)

(FUNCTION/EXIT/CH)

(REDIAL/PAUSE)

(FLASH/CALL!WAIT/PLAYBACK)

(TONE)

,

,

FWD/EDIT

 

Summary of Contents for KX-TG2583CB

























































































Reviews:

No comments