Selecting the Dialing Mode
You can program the dialing mode
using the handset near the base
unit
If you have touch tone service, set to “Tone” If rotary or pulse service is
used, set to “Pulse” Your phone comes from the factory set to “Tone”
Make sure the unit is in the standby mode initially.
Press
Press
or
repeatedly until the arrow
points to
Press
(Yes
key)
Press
or
repeatedly until the arrow
points
“Set dial mode"
Press
(Yes
key)
Press
or
to select
“Pulse"
or
“Tone"
Press
(Save
key)
beet, sounds
return to the standby mode, press
l
YOU can exit the programming mode any time by pressing
the handset has lost communication with the base unit, 3 beeps sound and
link to base
Place on cradle and try again
“isdisplayed