Problem
Remedy
The unit does not display the
need to subscribe to a Caller ID
caller’s name and/or phone
service from a telephone company
number
telephone equipment may be
interfering with your phone Disconnect
it and try again
electrical appliances connected to
the same outlet may be interfering with
the Caller ID information
*Telephone line noise may be affecting
the Caller ID information
The handset or base unit
not pause for over 60 seconds while
display goes to the standby
searching
mode while viewing the
Caller List
When a second call is
line mode selection is incorrect See
received during a
page 14
conversation, the unit does
not display the new caller’s
name and/or phone number
You cannot page the
handset is too far from the base unit
handset or the base unit
handset or the base unit is engaged
in an outside call, viewing the Caller
List/directory list or listening to
messages Try again later If you are
using the base unit, wait until
“Handset
in use"
disappears
You cannot redial by
the last number dialed was more than
pressing
32 digits long, the number will not be
redialed correctly
numbers entered after pressing
will not be included when
redialing
button has a double function as
either redial or pause It will redial the
last number dialed if pressed at the
outset of a call (p 26, 29) If another
number has been dialed first, it will
operate as a pause button (p 54)
75
