Panasonic KX- TG2583B Operating Instructions Manual Download Page 72

Page: 72 / 95

If the Following Appear...

If the unit detects a problem, one of the following messages will be
displayed on the handset or the base unit

Handset display

Not available

The battery needs to be charged Place the
handset on the base unit to charge the battery
(P

The handset has lost communication with the

base unit Place the handset on the base unit
and try again

BACK

was pressed

with the handset while the handset was on the
base unit Lift the handset and press the button
again

When trying to store an item or Caller List

information in the directory, the directory
memory is full (p 38, 44) To erase other stored
items from the directory, see page 51

While the base unit was not in the standby mode,

was pressed to search the Caller

List/directory list,

was pressed to

select an option, or

WAIT/PLAYBACK]

was pressed

While storing items in the directory, the handset
has lost communication with the base unit
Move closer to the base unit and try again

Summary of Contents for KX- TG2583B
































































































Search results

Summary of Contents for KX- TG2583B

Reviews:

Related manuals for KX- TG2583B

Brands by name

Popular brands

Panasonic KX- TG2583B, Operating Instructions Manual

Search results

Summary of Contents for KX- TG2583B

Reviews:

Related manuals for KX- TG2583B

Brands by name

Popular brands