Panasonic KX-TG2553CS Operating Instructions Manual Download | Manualshive

Page: 60 / 60

background image

Printed in Malaysia

PQQX13023ZA-BM

SM0301SA0

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario L4W 2T3

IF YOU SHIP THE PRODUCT TO A SERVICENTRE

Carefully pack and send prepaid, adequately insured and preferably in the original carton.

Include details of the defect claimed, and proof of date of original purchase.

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario L4W 2T3

PANASONIC PRODUCT—LIMITED WARRANTY

Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and

agrees to remedy any such defect for a period as stated below from the date of original purchase.

Telephone Accessory/Product

—One (1) year, parts and labour

FRS (Family Radio Service) Product

—One (1) year, parts and labour

LIMITATIONS AND EXCLUSIONS

This warranty does not apply to products purchased outside Canada or to any product which has
been improperly installed, subjected to usage for which the product was not designed, misused or
abused, damaged during shipping, or which has been altered or repaired in any way that affects
the reliability or detracts from the performance, nor does it cover any product which is used
commercially. Dry cell batteries are also excluded from coverage under this warranty.
Rechargeable batteries are warranted for ninety (90) days from date of original purchase.
This warranty is extended to the original end user purchaser only. A purchase receipt or other
proof of date of original purchase is required before warranty service is performed.

THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, EXCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT
OR CONSEQUENTIAL DAMAGES.

In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages, or the exclusion of implied warranties, so the above limitations and
exclusions may not be applicable.

WARRANTY SERVICE

For product operation and information assistance

, please contact your Dealer or our

Customer Care Centre at:
Telephone #: (905) 624-5505

Fax #: (905) 238-2360

Web: www.panasonic.ca

For product repairs

, please contact one of the following:

B

Your Dealer who will inform you of an authorized Servicentre nearest you.

B

Our Customer Care Centre at (905) 624-5505 or www.panasonic.ca

B

A Panasonic Factory Servicentre listed below:

Richmond, British Columbia

Calgary, Alberta

Panasonic Canada Inc.

Panasonic Canada Inc.

13131 Bathgate Place

6835-8th St. N. E.

Richmond, BC V6V 1Z3

Calgary, AB T2E 7H7

Tel:

(604) 278-4211

Tel:

(403) 295-3955

Fax: (604) 278-5627

Fax: (403) 274-5493

Mississauga, Ontario

Lachine, Québec

Panasonic Canada Inc.

Panasonic Canada Inc.

5770 Ambler Dr.

3075, rue Louis A. Amos

Mississauga, ON L4W 2T3

Lachine, QC H8T 1C4

Tel:

(905) 624-8447

Tel:

(514) 633-8684

Fax: (905) 238-2418

Fax: (514) 633-8020

CUSTOMER’S RECORD:
Customer Name: _________________________________________________________

Model No.: ____________________________ Serial No.: __________________________

Date of Purchase: __________________________________________________________

Dealer’s Name: _____________________________________________________________

Address: _____________________________ Phone Number:______________________

«
...
58
59
60

Summary of Contents for KX-TG2553CS





























































Reviews:

No comments

Related manuals for KX-TG2553CS

Brand: Yealink Pages: 15

Brand: Yealink Pages: 12

Brand: Yealink Pages: 3

Brand: Aastra Pages: 69

Brand: Gigaset Pages: 2

IntelliGate A150

Brand: Aastra Pages: 85

Brand: Vortex Pages: 19

Brand: Uniden Pages: 64

Brand: Truper Pages: 28

Brand: france telecom Pages: 31

Brand: Wacker Neuson Pages: 44

Voice Terminal 8510T

Brand: AT&T Pages: 29

Brand: Krown Pages: 20

Brand: Geemarc Pages: 48

Brand: GE Pages: 32

Brand: GE Pages: 88

Brand: GE Pages: 15

Brand: GE Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands