manualshive.com logo in svg

Panasonic KX-TG2553CS, Operating Instructions Manual

Share
Download
Panasonic KX-TG2553CS Operating Instructions Manual Download Page 23

23

Basic Operation

How caller information is displayed when a call is
received

Call Display Service

This unit is compatible with the Call Display service offered by your
telephone company. If you subscribe to Call Display service, the calling
party’s information will be displayed after the first ring.
This unit can record information for up to 50 different callers in the Caller
List. The Caller List information is sorted by the most recent to the oldest
call. When the 51st call is received, the first call is deleted.
Using the list, you can automatically call back a caller. You can store the
callers’ names and numbers from the Caller List into the directory.
If you subscribe to a Visual Call Waiting Service, when a second call is
received while talking, the new caller’s name and phone number will be
displayed (p. 44).

Talk

01-06-35

•

Caller information cannot be displayed in the following cases:

•

—If the caller dialed from an area which does not provide a Call Display service,

the display will show “

Unavailable Name & No

”.

•

—If a long distance call is identified, and the caller’s name and/or number cannot

be received, the display will show “

Long distance

”.

•

—If the caller has requested not to display his/her information, the display will

show “

Private caller

”.

The display shows the caller’s name
and number after the first ring.

After you answer the call, the display
will show the length of the call and the
battery strength.

TINA ROBINSON

1-000-222-3333

The CALLER ID (Call
Display) indicator light will
flash quickly when a call is
being received.

Summary of Contents for KX-TG2553CS





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands