Panasonic KX-TG2553CS Operating Instructions Manual Download

Page: 30 / 60

Press

to enter the Caller List.

Press

repeatedly to find the

caller you want to erase from the Caller
List.

Press

(CLEAR)

•

A beep sounds and the information is erased.

•

To erase other items, repeat from step 2.

•

To return to the standby mode, press

(FUNCTION/EXIT/CH)

Erasing Caller List Information

After checking the Caller List, you can erase some or all of the entries.

Make sure the handset is in the standby mode initially.

To erase a specific caller from the Caller List

TOM REAGAN
1-888-777-6666
12:20A JAN.12

√

Clear

10 new callers

=Directory

To erase all entries in the Caller List

Before erasing all entries, make sure that “

0 new caller

” is displayed.

Press

to enter the Caller List.

Press

(CLEAR)

Press

to select “

All clear

”.

Press

FWD/EDIT

(

Yes

key) or

(CLEAR)

•

A beep sounds and all entries are erased.

Exit

All clear

=Yes

All clear

0 new caller

=Directory

Exit
All clear

=Yes

Using the Caller List

Summary of Contents for KX-TG2553CS





























































Search results

Summary of Contents for KX-TG2553CS

Reviews:

Related manuals for KX-TG2553CS

Brands by name

Popular brands

Panasonic KX-TG2553CS, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2553CS

Reviews:

Related manuals for KX-TG2553CS

Brands by name

Popular brands