Panasonic KX-TG2343W - 2.4 GHz DSS Cordless Phone Operating Instructions Manual Download

Page: 44 / 76

Listening to Messages

Using the Base Unit

You can see the total number of recorded messages on the base unit display. If the
NEW MESSAGE indicator flashes on the base unit, new messages have been
recorded.

To play back messages

Press

[MESSAGE]

• The unit announces the number of new

messages and only new messages are played
back.

• When you have no new messages, the unit

announces “

No new messages. All message

playback

” and plays back all messages.

• When you have no messages, the unit

announces “

No messages

”.

• During playback, the display shows the message number.
• At the end of the last message, “

End of final message

” is heard. The unit will

announce the remaining recording time if it is less than 3 minutes.

Voice Day/Time Stamp:

During playback, the unit will announce the day and

time when each message was recorded (p. 14).

Base Unit

[MESSAGE]

NEW MESSAGE Indicator

PQQX13984YA.book 44 ページ２００４年３月１５日　月曜日　午前８時２６分

Summary of Contents for KX-TG2343W - 2.4 GHz DSS Cordless Phone













































































Search results

Summary of Contents for KX-TG2343W - 2.4 GHz DSS Cordless Phone

Reviews:

Related manuals for KX-TG2343W - 2.4 GHz DSS Cordless Phone

Brands by name

Popular brands

Panasonic KX-TG2343W - 2.4 GHz DSS Cordless Phone, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2343W - 2.4 GHz DSS Cordless Phone

Reviews:

Related manuals for KX-TG2343W - 2.4 GHz DSS Cordless Phone

Brands by name

Popular brands