Panasonic KX-TG2343W - 2.4 GHz DSS Cordless Phone Operating Instructions Manual Download

Page: 60 / 76

Troubleshooting

General

Problem

Cause & Remedy

The handset and/or base unit
does not work.

• Check the settings (p. 9–11).
• Check whether the dialing mode setting is

correct (p. 15).

• Fully charge the battery (p. 10).
• Clean the charge contacts and charge again

(p. 11).

• Check battery installation (p. 10).
• Unplug the base unit’s AC adaptor to reset it.

Plug in, and try again.

• Re-install the battery (p. 10) and fully charge

it.

“

Recharge battery

” is

displayed, “

” flashes, or

the handset beeps
intermittently.

• Fully charge the battery (p. 10).

“

Charge for 6h

” and “

”

are displayed and the handset
does not work.

• The battery has been discharged. Fully

charge the battery (p. 10).

• Check battery installation (p. 10).

You charged the battery fully,
but “

Recharge battery

” is

still displayed and/or “

”

continues to flash, or “

Charge

for 6h

” and “

” are

displayed.

• Clean the charge contacts and charge again

(p. 11).

• The battery may need to be replaced. If you

install a new battery, fully charge it (p. 10).

The CHARGE indicator does
not go out after the battery has
been charged.

• This is normal.

If you cannot solve your
problem

• Visit our website:

http://www.panasonic.com/support

• Contact us via the web at:

http://www.panasonic.com/contactinfo

• Call our customer call center at:

1-800-211-PANA(7262)

PQQX13984YA.book 60 ページ２００４年３月１５日　月曜日　午前８時２６分

Summary of Contents for KX-TG2343W - 2.4 GHz DSS Cordless Phone













































































Search results

Summary of Contents for KX-TG2343W - 2.4 GHz DSS Cordless Phone

Reviews:

Related manuals for KX-TG2343W - 2.4 GHz DSS Cordless Phone

Brands by name

Popular brands

Panasonic KX-TG2343W - 2.4 GHz DSS Cordless Phone, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2343W - 2.4 GHz DSS Cordless Phone

Reviews:

Related manuals for KX-TG2343W - 2.4 GHz DSS Cordless Phone

Brands by name

Popular brands