background image

T

elephone System

For assistance, please call: 1-800-211-PANA(7262)

27

Caller ID Service

This unit is compatible with Caller ID services offered by your telephone company. If 
you subscribe to Caller ID, caller names and phone numbers will be displayed and 
recorded in the Caller List.

How Caller ID information is displayed

When a call comes in, the unit will ring and Caller ID 
information will be received. The handset display will 
show the caller’s information.* 
• After you answer the call, the display will show the 

length of the call.

*Personalized Name Display

If you receive a call from one of the same phone numbers stored in the phone book, 
the handset will show the caller’s name stored in the phone book instead of 
incoming caller’s name.

• If the unit does not receive Caller ID information, one of the following will be 

displayed:

• Depending on the radio communications with the base unit, the handset may not 

display Caller ID information immediately after the first ring.

• If your unit is connected to a PBX which does not support Caller ID, you cannot 

access Caller ID service.

• Name display service may not be available in some areas. For further information, 

please contact your telephone company.

• If you subscribe to both Caller ID and Call Waiting with Caller ID services (CWID), 

when a second call is received while talking, a call waiting tone will be heard and 
the second caller’s information will be displayed on the handset in use (p. 39). 
Contact your telephone company for details about availability in your area, and to 
verify that CWID is activated on your telephone line.

Display

Meaning

Out of area

The caller dialed from an area which does not provide 
Caller ID service.

Private caller

The caller requested not to send his/her information.

Long distance

The caller made a long distance call.

Example

ROBINSON,TINA

1-555-222-3333

PQQX13984YA.book  27 ページ  2004年3月15日 月曜日 午前8時26分

Summary of Contents for KX-TG2343W - 2.4 GHz DSS Cordless Phone













































































Reviews: