Panasonic KX-TDE100 Features Manual Download Page 80 | Manualshive

Page: 80 / 460

Panasonic KX-TDE100 Features Manual Download Page 80

The FWD/DND status for trunk calls to that extension can be switched temporarily without clearing the
FWD destination. During setting, the LED of the button shows the current trunk call FWD/DND status. The
forwarding type and destination for trunk calls can also be set.

•

FWD/DND for intercom calls
The FWD/DND status for intercom calls to that extension can be switched temporarily without clearing the
FWD destination. During setting, the LED of the button shows the current intercom call FWD/DND status.
The forwarding type and destination for intercom calls can also be set.

•

FWD—No Answer timer
The length of time until unanswered calls are forwarded can be modified. This setting is applied to both
intercom and trunk call forwarding.

•

FWD for Virtual PS
If the extension is the first registered extension in an Incoming Call Distribution Group, the extension user
can set the FWD destination and forwarding status (on/off) for up to 4 virtual PSs preregistered to the group.
(

®

1.25.6 Virtual PS)

These settings are only available when FWD/DND buttons are set through system programming to FWD/DND
Setting mode.

Conditions

•

When FWD/DND buttons are set to FWD/DND Cycle Switch mode, pressing the FWD/DND button cycles
the FWD/DND setting.
In this mode, when intercom calls are set to be handled differently from trunk calls (forwarding type, forward
destination, DND on/off):

a.

in idle mode, the light patterns of the FWD/DND—Both button (including FWD/DND button [fixed
button]) and the Group FWD—Both button will indicate the setting for either trunk calls or intercom
calls, but not both.

b.

the FWD and DND icons on a PS display reflect the settings for trunk calls only.

c.

pressing the FWD/DND—Both button (including FWD/DND button [fixed button]) or the Group FWD—
Both button will be ignored.

•

When both the FWD and DND features are assigned simultaneously, pressing the button changes the
settings as follows:

FWD

DND

Off

•

A FWD/DND button customised on a flexible button is always in FWD/DND Cycle Switch mode, and the
mode cannot be changed.

PC Programming Manual References

4.9 [2-6-1] Numbering Plan—Main—Features

→

FWD/DND Set / Cancel: Call from CO & Extension

→

FWD/DND Set / Cancel: Call from CO

→

FWD/DND Set / Cancel: Call from Extension

→

Group FWD Set / Cancel: Call from CO & Extension

→

Group FWD Set / Cancel: Call from CO

→

Group FWD Set / Cancel: Call from Extension

4.18 [2-9] System Options—Option 1

→

PT Fwd / DND—Fwd LED

→

PT Fwd / DND—DND LED

→

PT Fwd / DND—Fwd/DND key mode when Idle

6.1 [4-1-1] Wired Extension—Extension Settings—FWD / DND
6.5 [4-1-4] Wired Extension—Flexible Button

80

Feature Guide

1.3.1 Call Forwarding (FWD)/Do Not Disturb (DND)

«
...
78
79
80
81
82
...
»

Summary of Contents for KX-TDE100













































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands