manualshive.com logo in svg

Panasonic KX-TDE100, Features Manual

Share
Download
Panasonic KX-TDE100 Features Manual Download Page 324

The dial tone type for the ARS feature can be selected separately. If "

Type A

" is selected for the ARS,

dial tone 1A will be heard. If "

Type B

" is selected, dial tone 1B will be heard.

•

Distinctive dial tones can be disabled. When disabled, dial tone 1 will be heard in all cases except those
marked with "*1" in the table above.

•

Dial Tone Patterns

All dial tone patterns have a default (

®

 3.2.1  Tones/Ring Tones).

•

Only dial tone 1 is sent to the extensions in the VM (DPT/DTMF) group. (

®

 1.24.2.1  Voice Mail (VM)

Group)

PC Programming Manual References

4.18  [2-9] System Options—Option 3

→

Dial Tone—Distinctive Dial Tone

→

Dial Tone—Dial Tone for Extension

→

Dial Tone—Dial Tone for ARS

324

Feature Guide

1.29.1 Dial Tone

Summary of Contents for KX-TDE100













































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands