manualshive.com logo in svg

Panasonic KX-TDE100, Features Manual

Share
Download
Panasonic KX-TDE100 Features Manual Download Page 27

1.1.1.4  Multiple Subscriber Number (MSN) Ringing Service

Description

Provides automatic direction of an incoming ISDN-BRI (Basic Rate Interface) line call with an MSN to a
preprogrammed destination. One ISDN-BRI port can support a maximum of 10 MSNs. Each MSN has a
destination for each time mode (day/lunch/break/night).
Point-to-multipoint must be selected for the ISDN configuration.

[Method Flowchart]

CLI works.

Yes

Yes

No

Does the call have its CLI* 
information and is CLI mode 
enabled for the time mode?

No

Is the CLI destination 
assigned?

The call is routed to the 
MSN destination.

The call is routed to the 
CLI destination.

No

Yes

Yes

Is the MSN found in the 
MSN table?

The call is ignored.

Is the MSN destination for 
the time mode assigned?

No

*: Calling Line Identification (CLI) Distribution:
    If the CLI routing is enabled and the caller's identification number is assigned in the Caller ID 
    Table, the call will not be routed to the MSN destination, but routed to the CLI destination.

No

Are any MSNs assigned 
in the MSN table?

Yes

The call is routed to the 
operator (Intercept 
Routing—No Destination).

The call is routed to the 
operator (Intercept 
Routing—No Destination).

A trunk call is received.

[Programming Example of MSN Table for ISDN BRI Port 1]

A table can be programmed for each ISDN-BRI port. Each BRI port has 10 MSN locations.

®

 12.6  [10-4] MSN Table

Feature Guide

27

1.1.1 Incoming Trunk Call Features

Summary of Contents for KX-TDE100













































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands