Panasonic KX-TDE100 Operating Manual Download

Page: 83 / 214

1.3 Telephone Features and Operation

Operating Manual

To set/cancel

1.3.31 Hands-free Operation

To make/answer a call

•

The AUTO ANS button light shows the current status as follows:

Off:

Not set

Red on:

Set

•

PS users: Refer to "Operating Instructions" for PS.

You can have a conversation in hands-free mode using the SP-PHONE button.

•

When performing hands-free operation:

–

If it is difficult to hear the other party's voice,

Increase the volume using the Navigator Key, Jog Dial, or Volume Key.

–

If the other party has difficulty hearing you,

Decrease the volume.

–

If the other party reports that your voice echoes,

Use the telephone in a room that has curtains, carpeting or both.

–

If parts of the conversation cannot be heard,

If you and the other party speak at the same time, parts of your conversation may be lost.
To avoid this, try to speak alternately.

Press

AUTO ANS

While on-hook

AUTO ANS

MUTE

Press

SP-PHONE

Summary of Contents for KX-TDE100























































































































































































































Search results

Summary of Contents for KX-TDE100

Reviews:

Related manuals for KX-TDE100

Brands by name

Popular brands

Panasonic KX-TDE100, Operating Manual

Search results

Summary of Contents for KX-TDE100

Reviews:

Related manuals for KX-TDE100

Brands by name

Popular brands