Panasonic KX-TDE100 Operating Manual Download

Page: 20 / 214

1.1 Before Operating the Telephones

Operating Manual

Restrictions

Some features may be restricted at your extension depending on system programming and the type of
telephone being used.

Icon Descriptions

The following icons show you the feature availability, notes and action to use the features.

This feature cannot be used with a
single line telephone.

Seize a CO line (One of the
following).

•

Press the CO button.

•

Dial automatic line access
number 9.

•

Dial CO line group access
number and CO line group
number.

See "Programming" for Related
Programming if necessary.

Off-hook (One of the following).

•

Lift the handset.

•

Press the SP-PHONE button.

•

Press the MONITOR button. (To
start talking, lift the handset.)

•

Press TALK button.

Press the Call button on the
Doorphone.

On-hook (One of the following).

•

Hang up.

•

Press the SP-PHONE button.

•

Press the MONITOR button.

•

Press CANCEL button.

Press the hookswitch lightly.

Press the corresponding feature
button on the proprietary telephone.

Talk.

Enter the required number.

Enter the account code.

You will hear a busy, confirmation,
dial, ring or ringback tone.

B. Tone: Busy Tone
C. Tone: Confirmation Tone
D. Tone: Dial Tone
R. Tone: Ring Tone
R. B. Tone: Ringback Tone

Dial an extension number.

Dial outside phone number.

Dial the telephone number.

Press any dial key (0–9, , #).

Press the HOLD button on your SIP
Extension.

CO line

group no.

(CO)

desired no.

account code

extension no.

outside

phone no.

dial key

HOLD

Summary of Contents for KX-TDE100























































































































































































































Search results

Summary of Contents for KX-TDE100

Reviews:

Related manuals for KX-TDE100

Brands by name

Popular brands

Panasonic KX-TDE100, Operating Manual

Search results

Summary of Contents for KX-TDE100

Reviews:

Related manuals for KX-TDE100

Brands by name

Popular brands