Panasonic KX-TDE100 Operating Manual Download | Manualshive

Page: 65 / 214

background image

1.3 Telephone Features and Operation

Operating Manual

65

•

The FWD/DND button light shows the current status as follows:

Off:

Both features are not set.

Flashing red slowly:

FWD mode

Red on:

DND mode

•

The system has two modes: (1) FWD/DND Cycle Switch Mode and (2) FWD/DND Setting
Mode. Ask your manager what mode your system is in if you are not sure.

(1)

When in FWD/DND Cycle Switch Mode

:

Pressing the FWD/DND button (fixed button) while in idle status will cycle the setting as
shown below:

(2)

When in FWD/DND Setting Mode

:

Pressing the FWD/DND button (fixed button) while in idle status allows you to switch the
FWD/DND status and set the FWD destination (refer to "Switching FWD/DND Status
Using Fixed FWD/DND Button").

Note

A FWD/DND button (customized button) is always in FWD/DND Cycle Switch Mode: the
mode cannot be changed.

•

If your extension has set this feature, a calling extension will hear DND tone.

•

If this feature is set, the Call Forwarding (FWD) feature does not work.

•

Specified extensions can override this feature and call DND extensions (DND Override).

•

When using a SIP Extension, you cannot set/cancel the DND feature at your extension.
However, this feature is available if set through system programming.

•

When making a call using an SDN button to a PDN extension with DND set, this feature will
temporarily be deactivated.

•

When intercom calls are set to be handled differently from outside calls (DND set/cancel), we
recommend establishing buttons for both FWD/DND—Outside calls and FWD/DND—
Intercom calls, because:

a)

the light patterns of the FWD/DND—Both calls button (including FWD/DND button [fixed
button]) will indicate the setting for either outside calls or intercoms calls, but not both.

Note

The DND icon on PS display reflects the setting for outside calls only.

b)

pressing the FWD/DND—Both calls button (including FWD/DND button [fixed button])
will not change the FWD or DND mode for intercom calls and outside calls separately.

Customizing Your Phone

•

3.1.4 Customizing the Buttons
Create or edit FWD/DND (Both calls, Outside calls, Intercom calls) buttons.

FWD

DND

Off

«
...
63
64
65
66
67
...
»

Summary of Contents for KX-TDE100























































































































































































































Reviews:

No comments

Related manuals for KX-TDE100

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands