2.6 Utility
PC Programming Manual
47
The pair port test can be carried out using one LCOT or ELCOT card and one DHLC, SLC8, SLC16,
MSLC16, ESLC16, EMSLC16, CSLC16, or ECSLC24 card.
Note
With the KX-TDA600, the pair of cards to be used for the pair port tests must be installed within
the same shelf.
The tests that are performed are as follows:
To perform a pair port test
1.
From the
Utility
menu, select
Diagnosis
.
2.
Click on the
Status
cell of the extension card to be tested, and set it to "OUS".
3.
Click on the cell showing the card type.
A new window will be displayed.
4.
Select the
Pair Port Test
option.
A new window will be displayed. The card you selected in Step 3 will be shown in the
Extension
Line Slot No.
drop-down list.
5.
From the
CO Line Slot No.
drop-down list, select the slot number of the CO line card you want
to test.
6.
From the
CO Line Port No.
drop-down list, select the port number of the CO line you want to test.
7.
Click
Test
.
The error report will be displayed.
8.
Select an option:
•
Click
Capture
if you want to save the displayed information.
1.
Enter a file name, or select a file to overwrite.
2.
Click
Save
.
•
Click
Cancel
to return to the Diagnosis screen.
Network Loopback Test (KX-TDA100/KX-TDA200/KX-TDA600 only)
Performs a remote loopback test on the PRI23 card.
Notes
•
To perform this test, it is necessary to set
Loopback Test started by Network
in
2.8.14 [1-
1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
to
"Enable".
Line current OFF (Ext—>CO)
Line current from extension to CO line turns off.
Line current ON (Ext—>CO)
Line current from extension to CO line turns on.
Off hook detection (CO—>Ext)
Off-hook generation/detection from CO line to
extension
DTMF detection (CO—>Ext)
DTMF generation/detection from CO line to extension
DP detection (CO—>Ext)
DP generation/detection from CO line to extension
BELL detection (Ext—>CO)
BELL generation/detection from extension to CO line
Speech path (Ext—>CO)
Speech path from extension to CO line
Speech path (CO—>Ext)
Speech path from CO line to extension
