Panasonic KX-TDA15 Installation Manual Download

Page: 50 / 164

2.2 Installation of the Hybrid IP-PBX

Installation Manual

2.2.9

Wall Mounting (KX-TDA15)

Mounting on Wooden Wall

Place the reference for wall mounting (on the last page of this manual) on the wall to mark the 3 screw
positions.

Install the screws and washers (included) in the wall.

Notes

•

Make sure that the screw heads are at the same distance from the wall.

•

Install the screws perpendicular to the wall.

Hook the main unit on the screw heads.

Notes

•

Do not block the openings of the cabinet. Leave at least 20 cm of space above and 10 cm to the
sides of the Hybrid IP-PBX for ventilation.

•

Make sure that the surface behind the cabinet is flat and free of obstacles, so that the openings on
the back of the cabinet will not be blocked.

•

Be careful not to drop the cabinet.

250 mm

130 mm

Washer

Drive the screw
to this position.

Summary of Contents for KX-TDA15





































































































































































Search results

Summary of Contents for KX-TDA15

Reviews:

Related manuals for KX-TDA15

Brands by name

Popular brands

Panasonic KX-TDA15, Installation Manual

Search results

Summary of Contents for KX-TDA15

Reviews:

Related manuals for KX-TDA15

Brands by name

Popular brands