Panasonic KX-TD612NE Programming Manual Download Page 25

Page: 25 / 285

Manager Programming

Programming Guide

10.

Press STORE.

11.

Press NEXT.

Display example: 00:00

12.

Enter the hour.

To change the current entry, press CLEAR and the new hour.

13.

Press .

14.

Enter the minute.

To change the current entry, press CLEAR and new minute.

15.

Press STORE.

16.

Press END.

Conditions

•

After changing an entry, you can press STORE. You do not have to perform all of the rest
of the steps.

•

To go back to the previous field, press

at steps 4 through 9 and steps 13 through 14.

•

If you hear an alarm after pressing STORE, check that the date is valid.

•

The clock starts immediately after the STORE button is pressed.

•

You cannot leave the entry empty.

•

The date and time are adjusted automatically, when the first outgoing call is made through
ISDN line after 3 o'clock each morning.

Features Guide References

Automatic Adjust Time

Display, Time and Date

Summary of Contents for KX-TD612NE






























































































































































































































































































Search results

Summary of Contents for KX-TD612NE

Reviews:

Related manuals for KX-TD612NE

Brands by name

Popular brands

Panasonic KX-TD612NE, Programming Manual

Search results

Summary of Contents for KX-TD612NE

Reviews:

Related manuals for KX-TD612NE

Brands by name

Popular brands