Panasonic KX-TD612NE, Programming Manual

Page: 72 / 285

System Programming
72 Programming Guide
[106] Station Hunting Type
Description
Used to enable or disable hunting and set the Station Hunting type for each hunting group.
There are 6 Station Hunting types available: Circular, Uniform Call Distribution (UCD), Voice
Mail (VM), Automated Attendant (AA), Ring, and No Reply. If circular hunting is assigned
for a group, all of the extensions in the group are hunted until an idle one is found. If VM
hunting is assigned, all of the VM ports of an extension group are hunted until an idle one is
found to allow Voice Mail Service. If AA hunting is assigned, all of the AA ports of an
extension group are hunted until an idle one is found to allow AA Service. If UCD is assigned,
group members are hunted in circular way, starting at the extension following the last one
called. If Ring hunting is assigned, all of the extensions in the group ring simultaneously. If No
Reply hunting is assigned, the extensions in the group are hunted in order of registration for a
programmed interval of time.
Selection
• Hunting group number: 01-32
• Disable/Circular/VM/AA/UCD/RING/No Reply
Default
All hunting groups — Disable
Programming
1.
Enter 106.
Display: Hunt Type
2.
Press NEXT.
Display: Group NO?
3.
Enter a hunting group number.
To enter hunting group number 1, you can also press NEXT.
Display example: 01:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To program another hunting group, press NEXT or PREV, or SELECT and the desired
hunting group number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• If you want to receive a call at ISDN extensions, you have to assign No Reply hunting,
otherwise you cannot receive the call.