Installation
Installation Manual
59
2.5.2
Optional Analogue CO Expansion Card and Caller ID
Sending Card with 1 CO I/F Installation
An Analogue CO Expansion Card or Caller ID Sending Card with 1 CO I/F can be installed in
the system to add 1 analogue CO line.
CAUTION
When installing or uninstalling an Analogue CO Expansion Card or Caller ID Sending Card
with 1 CO I/F, disconnect the telephone line from the card.
1.
Remove the 2 screws.
2.
Open the front cover.
3.
Attach the optional Analogue CO Expansion Card (KX-TD61281) or Caller ID Sending
Card with 1 CO I/F (KX-TD61283) to the system and connect the cord to the connector,
then secure the screw as shown below.
Note
Be sure to connect the cord in such a way that the ferrite core is closer to the optional Analogue
CO Expansion Card or Caller ID Sending Card with 1 CO I/F than to the main board. The cord
can be installed in the wrong way, so please be careful.
4.
Close the cover.
Optional Card Connector
Optional Analogue CO
Expansion Card (KX-TD61281) or
Caller ID Sending Card
with 1 CO I/F (KX-TD61283)
Screw
Analogue CO Expansion Connector
Ferrite Core
