4.6
Outside Line Programming
DTMF Time
404
4-98
System Programming
Description
An outside line set to DTMF (Dual Tone Multi-Frequency) mode in
program [402] “Dial Mode Selection” can have two settings. This
program sets the duration of the DTMF signals sent to an outside
line to DTMF mode.
Selection
• Outside line (CO) number: 1 through 3,
(
=all outside lines)
• Time (milliseconds): 80 / 160
Default
All outside lines – 80 ms
Programming
1.
Enter 404.
Display: 404 DTMF TIME
2.
Press NEXT.
Display: CO Line NO?
→
3.
Enter an outside line number.
To enter outside line number 1, you can also press NEXT.
Display example: CO1: 80msec
4.
Keep pressing SELECT until the desired selection is
displayed.
5.
Press STORE.
6.
To program another outside line, press NEXT or PREV, or
SELECT and the desired outside line number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• To assign all outside lines to one selection, press the
key in step 3.
In this case, the display shows the contents programmed for outside line
1.
• The DTMF time required is determined by the outside line or PBX line.
Feature References
Section 3, Features
Dial Type Selection