Panasonic KX-TD308 Installation Manual Download Page 277

Page: 277 / 408

4.3

System Programming

Day / Night Service Switching Mode

101

4-34

System Programming

Description

This program is used to determine if night mode is set
automatically or manually.

Selection

Manual / Auto (automatic)

Default

Manual

Programming

Enter 101.

Display: 101 DAY/NT AUTO

Press NEXT.

Display example: D/N Mode:Manual

Keep pressing SELECT until the desired selection is
displayed.

Press STORE.

Press END.

Conditions

• If automatic switching is assigned, day / night mode is switched at the

time programmed in [102] “Day / Night Service Starting Time”.

• The operator and manager can switch the day / night mode at any time.

Feature References

Section 3, Features
Night Service

Summary of Contents for KX-TD308

























































































































































































































































































































































































































Search results

Summary of Contents for KX-TD308

Reviews:

Panasonic KX-TD308, Installation Manual, Page: 277 / 408

Search results

Summary of Contents for KX-TD308

Reviews: