manualshive.com logo in svg

Panasonic KX-TD308, Installation Manual, Page: 325 / 408

Share
Download
Panasonic KX-TD308 Installation Manual Download Page 325

4.5

TRS / ARS Programming

ARS Mode

312

4-82

System Programming

Description

Allows you to turn on or off the Automatic Route Selection (ARS)
mode.  ARS, if enabled, selects the least expensive route to be used
for an outside call.

Selection

On / Off

Default

Off

Programming

1.

Enter 312.

Display: 312 ARS MODE SET

2.

Press NEXT.

Display example: ARS:Off

3.

Press SELECT until the desired selection is displayed.

4.

Press STORE.

5.

Press END.

Conditions

• If “Off” is selected, the Automatic Line Access feature functions

instead of ARS.

• Programs [313] through [331] are used to program ARS.

Feature References

Section 3, Features
Automatic Route Selection (ARS)
Line Access, Automatic

Summary of Contents for KX-TD308

























































































































































































































































































































































































































Reviews:

No comments