manualshive.com logo in svg

Panasonic KX-TD308, Installation Manual, Page: 379 / 408

Share
Download
Panasonic KX-TD308 Installation Manual Download Page 379

4.9

Resource Programming

External Pager Confirmation Tone

805

4-136

System Programming

Description

Used to remove the confirmation tone for external pagers.  The
default setting sends confirmation tone 2 to the external pagers
before paging is broadcast.  This programming applies to all the
external pagers.

Selection

On / Off

Default

On

Programming

1.

Enter 805.

Display: 805 EX PAGE TONE

2.

Press NEXT.

Display example: Tone:On

3.

Keep pressing SELECT until the desired selection is
displayed.

4.

Press STORE.

5.

Press END.

Conditions

The external pager is a user-supplied item.  One external pager can be
installed to the system. 

Feature References

Section 3, Features
Confirmation Tone

Paging – External

Paging – All 

Summary of Contents for KX-TD308

























































































































































































































































































































































































































Reviews:

No comments