PT
PT
• Up to 24 digits can be stored and redialled not including the ISDN port access code.
• You can change the outside line when dialling. In this case, press the desired CO button or
enter the ISDN port access number before pressing the SAVE button.
• If you dial in the handsfree mode (press SP-PHONE + SAVE button), redial will be
repeated four times at 120 second intervals by default (Automatic Redial – DPT only).
Repeating time and interval can be changed by System Programming.
• If there is a PAUSE in the assigned numbers, the numbers after the PAUSE are sent as
DTMF signals.
• Initial Settings (Section 2.2)
Customising the Buttons on Your Telephone
• Timer Programming (Section 3.5)
[208] Automatic Redial Repeat Time
[209] Automatic Redial Interval Time
2-22
Operations
2.3
Making Calls
☞
!
!
Press SAVE.
Off-hook
Press SAVE.
AUTO DIAL
STORE
Press STORE.
Redialling the Saved Number (Saved Number Redial)
During a conversation or while hearing a busy tone, you can store a dialled telephone
number to automatically redial the number through the same outside line later. The saved
number can be redialled until another one is stored.
It is required to assign the SAVE button on your telephone beforehand.
S
toring the number
D
ialling
During a conversation or while hearing a busy tone;
