Panasonic KX-TD208CE Page 32 Operating Instructions Manual Download

Page: 32 / 106

2-18

Operations

2.3

Making Calls

• Up to 16 digits, consisting of “0 through 9” and “

”, can be stored.

• Enter “

” for a PAUSE.

• If there is a PAUSE in the assigned numbers, the numbers after the PAUSE are sent as

DTMF signals.

• You can store an extension number, a telephone number, or a feature number.
• To store the telephone number of an outside party, the ISDN port access code (9, 81 or 82)

must be stored as the leading digit.

• With the KX-T7235, KX-T7433 and KX-T7436, you can execute this feature with the

display operation.

• Display Operation (Section 2.7)

Display Operation – STA Speed
Station Speed Dialling Number/Name Assignment

Any Telephone

Station speed

dial no.

Off-hook

Dial station speed
dial number (0···9).

Dial 6

☞

Station speed

dial no.

desired no.

Off-hook

Dial station speed
dial number (0···9).

Dial desired number.
(16 digits max.)

On-hook

Dial 60.

Dial #.

Confirmation
tone

SSD N

UMBER

*You can write down and use the SSD Table for

your reference.

Dialling with a Station Speed Dialling Button (Station Speed Dialling)

Allows you to store up to ten speed dial numbers which are only available to you.

toring the phone number

ialling

SD Table

Summary of Contents for KX-TD208CE











































































































Search results

Summary of Contents for KX-TD208CE

Reviews:

Related manuals for KX-TD208CE

Brands by name

Popular brands

Panasonic KX-TD208CE, Operating Instructions Manual

Search results

Summary of Contents for KX-TD208CE

Reviews:

Related manuals for KX-TD208CE

Brands by name

Popular brands