Panasonic KX-TD1232JT, Programming Manual

Page: 49 / 402

2.1 Manager Programming
General Programming 49
[010] Budget Management
Description
Assigns the charge limitation of a call on the extension basis.
Selection
• Jack number:
KX-TD816 – 01 through 16, (-1 / -2)
KX-TD1232 – 01 through 64, (-1 / -2)
( =all jacks, -1=first part, -2=second part)
• Charge limitation (Charge): 0 through 59999
Default
All jacks – 0
Programming
1.
Enter 010.
Display: Charge Limit
2.
Press NEXT.
Display: Jack NO?
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
Display example: #01-1: 0
4.
Enter a charge limitation.
To delete the charge limitation, press CLEAR.
5.
Press STORE.
6.
To programme another jack, press NEXT or PREV, or SELECT and the desired jack
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• If the charge limitation is set "0", no restriction is applied.
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available.
• To assign all jack numbers to one selection, press the key in step 3. In this case, the
display shows the contents programmed for Jack 01.