Panasonic KX-TD1232JT, Programming Manual

Page: 212 / 402

2.9 Optional Programming
212 General Programming
02 7 An outside line set to pulse or call
blocking mode in programme
[402]
Dial Mode Selection can have
two settings. This assigns the pulse
break ratio during dial pulsing. Select an
appropriate ratio depending on the
standard in your country.
0 : 60 %
1 : 67 % 0 Dial Type
Selection
8 Determines whether an extension
mailbox number is substituted by the
extension number or it is programmable
(free). If a call is forwarded or rerouted
to the VPS, this system automatically
transmits the mailbox number to the
VPS to specify the user's mailbox. To
make it programmable, select "1 (free)",
then assign the number in programme
[609]
Voice Mail Access Codes and
[665] PS Voice Mail Access Codes.
0 : extension
number
1 : free
0 Voice Mail
Integration
9 Determines the initial display of a
digital display proprietary telephone
(except for KX-T7230) in Station Speed
Dialling. 0 : names
1 : numbers 0 Call Directory
10 Reserved
12,11 Selects inter-digit pause for pulse
dialling.
00 : 630 ms
01 : 830 ms
10 : 1030 ms 01 None
13 Selects intercom dial tone frequency. 0 : normal
1 : distinctive 0 None
14 Selects the time range of detecting the
flash signal. According to the assigned
time range, the system regards the signal
as a flash or disconnection. 0 : 50 ms – 150 ms
= flash
150 ms –
= disconnect
1 : 50 ms – 1000 ms
= flash
1000 ms –
=disconnect
0 None
15, 16 Reserved
Explanation
Area Bit Description Selection Default Feature Guide
References