Panasonic KX-TD1232JT, Programming Manual

Page: 260 / 402

3.3 ISDN Line Programming
260 ISDN Programming
[430] ISDN Extension Progress Tone
Description
Enables or disables to send the progress tone to ISDN extension on ISDN port basis.
Selection
• Port number:
KX-TD816 – 01 through 06,
KX-TD1232 – 01 through 12,
( =all ports)
• Enable / Disable (no tone)
Default
All ports – Disable
Programming
1.
Enter 430.
Display: ISDN EXT Tone
2.
Press NEXT.
Display: Port NO?
3.
Enter a port number.
To enter port number 01, you can also press NEXT.
Display example: #01:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another port, press NEXT or PREV, or SELECT and the desired port
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, port numbers 01 through 06 are for the Master System and 07 through
12 are for the Slave, if available.
• To assign all ports to one selection, press the key in step 3. In this case, the display shows
the contents programmed for Port 01.
• After this assignment, you should reset the system to make this assignment effective.