Panasonic KX-TD1232JT, Programming Manual

Page: 41 / 402

2.1 Manager Programming
General Programming 41
[006] Operator / Manager Extension Assignment
Description
Assigns the jack number for a manager and/or operators. The manager extension can perform
System Programming. The operators have the ability to perform operator services.
Selection
• OPE-1 (operator 1) / OPE-2 (operator 2) / MNGER (manager)
• Jack number:
KX-TD816 – 01 through 16
KX-TD1232 – 01 through 64
Default
Operator 1 – Jack 01;
Operator 2 and Manager – Not stored
Programming
1.
Enter 006.
Display: Operator / Manage
2.
Press NEXT to programme operator 1.
Display: OPE-1:Jack01
To programme another item, you can also keep pressing NEXT or PREV until the
desired one is displayed.
3.
Enter a jack number.
To assign no operator or manager, press CLEAR.
To change the current entry, press CLEAR and enter the new jack number.
4.
Press STORE.
5.
To programme another item, press NEXT or PREV.
6.
Repeat steps 3 through 5.
7.
Press END.
Conditions
• Up to two operators and a manager can be programmed.
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available.
• The manager cannot be assigned the jack number of the Console Port set in programme
[007]
Console Port and Paired Telephone Assignment.
• If the assigned jack is in eXtra Device Port (XDP) mode, the proprietary telephone jack is
treated as the manager / operator extension.